Publicité
Les langues disponibles
Les langues disponibles
9
IGNITION HARNESS CONNECTIONS, continued
8-PIN IGNITION SWITCH CONNECTIONS, continued
9. Route the remote engine starter ignition harness down the steering column along the top of the vehicle's plastic wire
harness shroud. Secure the remote engine starter harness to the vehicle's plastic wire harness shroud with one (1)
supplied 39cm tie wrap. (FIGURE EE)
10. Continue to route the remote engine starter ignition harness along the vehicle's ignition harness towards the left side
of the dashboard securing with three (3) of the supplied 39cm tie wraps. (FIGURE EE)
11. Allow the remote engine starter ignition harness to drop down behind the vehicle's fusebox and plug into the bottom
(large) connector on the remote engine starter ECU (previously mounted in Step 7). (FIGURE EE)
12. Secure the remote engine starter ignition harness and any excess antenna harness to the vehicle wiring using two (2)
of the supplied 39cm tie wraps. (FIGURE EE)
FIGURE EE
PART NUMBER
ISSUE
H001SAL000
Plastic Wire Harness Shroud
DATE
00
4 April 2014
SUBARU OF AMERICA
12 OF 17
Publicité
