Miller Spoolmatic 30A Manuel Du Propriétaire page 27

OPTIONS AND ACCESSORIES
SX FLEX HEAD KIT
(#131 104)
For .030 in.−1/16 in. (0.8 mm−1.6
mm) wire.
Used in place of the standard
straight barrel. Flexible head tube
bends 60 degrees in any direction
for easier joint access and
improved operator comfort.
Supplied with two Teflon liners and
one contact tip for each wire size
listed.
REPLACEMENT LINERS FOR
FLEX HEAD
(#138 255) .030 and .035 in.
(0.8 and 0.9 mm) wire
(#132 682) 3/64 and 1/16 in.
(1.2 and 1.6 mm) wire
SX−A 50 DEGREE CURVED
BARRELS*
(#147 175) 6 in. (152 mm)
(#147 176) 10 in. (254 mm)
Used with .030−1/16 in. (0.8−1.6
mm) wire. Kits supplied with two
liners that accommodate all wire
sizes.
REPLACEMENT TEFLON
LINERS FOR CURVED
BARRELS
For 6 in. Barrel
(#144 858) .030 and .035 in.
(0.8 and 0.9 mm) wire
(#144 859) .047 and 1/16 in.
(1.2 and 1.6 mm) wire
For 10 in. Barrel
(#144 854) .030 and .035 in.
(0.8 and 0.9 mm) wire
(#144 855) .047 and 1/16 in.
(1.2 and 1.6 mm) wire
SX−A 50 DEGREE CURVED
NOZZLE KIT
(#147 174)
Attaches to standard gun barrel
assembly and is ideal for access to
confined weld joint areas. Used
with .030−1/16 in. (0.8−1/6 mm)
wire.
Kit includes two of each size
contact tips to accommodate all
wire sizes. Uses standard straight
barrel head tube liner.
REPLACEMENT CONTACT TIPS
FOR CURVED NOZZLE
(#148 155) .030 and .035 in.
(0.8 and 0.9 mm) wire
(#148 154) .047 in. (1.2 mm)
wire
(#148 156)1/16 in. (1.6 mm)
wire
3 IN. HEAD TUBE EXTENSION*
(#137 787)
Extends the standard gun barrel 3
in. (72 mm) when a longer reach is
required. The head tube extension
is supplied with two liners to
accommodate all wire sizes.
REPLACEMENT LINERS FOR
HEAD TUBE EXTENSION
(#138 223) .030 and .035 in.
(0.8 and 0.9 mm) wire
(#138 224) 3/64 and 1/16 in.
(1.2 and 1.6 mm) wire
*Note: Uses standard Spoolmatic contact
tips. (Refer to Spoolmatic Gun
Consumables chart for contact tips.)
GUN OPTIONS AND
ACCESSORIES
CABLE COVER
(#118 678)
Protects gun hose and cable
assembly from wear and abrasion.
Features a full−length zipper.
SX HEAT SHIELD
(#131 103)
Helps protect operator's hand from
spatter and reflected heat.
SPARE SPOOL CANISTER
(#132 230)
Canister accommodates 4 in. (102
mm) spools of wire. Can be loaded
with other popular wires to save
time in changeover.
HOSE AND CABLE EXTENSION
KITS
(#132 228) 25 ft. (7.6 m)
(#132 229) 50 ft. (15 m)
Extends the standard 30 ft. (9 m)
hose and cable assembly.
Convenient plug−in connections.
Includes gas hose, control cord,
and weld power cable with
International style insulated
connector.
2/96