AMATECH F-70615-US Instructions D'utilisation page 13

INSTRUCTIONS FOR USE
Adjusting Advanced Arm Support Position:
Ensure patient and device are fully supported before adjusting any joints.
To manipulate the following device attributes, adjust Clip-on™ Socket and
Armboard Clamp, and move components as shown in the figure below.
1. Height
2. Angle of the Support Rod
3. Lateral position
4. Radial angulation of the Armboard
Document Number: 80028284
Version: B
Page 13
Issue Date: 18 MAR 2020
Ref Blank Template: 80025118 Ver. E