What To Do If; Disposal - Progress PAS6100E Notice D'utilisation

14 progress
Cleaning the appliance after each use
1. Wipe the appliance with a damp cloth
and a little washing up liquid.
2. Rub the appliance dry using a clean cloth.
Removing deposits
1. Place a scraper on the glass ceramic sur-
face at an angle.
Type of dirt
sugar, food containing
sugar
plastics, tin foil
limescale and water
rings
fat splashes
shiny metallic discolor-
ation
* Scrapers and cleaners for glass ceramic
and stainless steel can be purchased in spe-
cialist shops
Remove stubborn residues with a clean-
er for glass ceramic or stainless steel.

What to do if ...

Problem
The cooking zones are not func-
tioning.
The residual heat indicator is not
displaying anything
If you are unable to remedy the problem
by following the above suggestions,
please contact your dealer or the Cus-
tomer Care Department.
Warning! Repairs to the appliance are
only to be carried out by qualified service
engineers. Considerable danger to the
user may result from improper repairs.

Disposal

The symbol on the product or on its
packaging indicates that this product may
immediately when the appliance
yes
yes
---
---
---
Possible cause
The desired heat setting is not
set.
The fuse in the house's electrical
wiring (fuse box) has been trip-
ped.
The cooking zone was only on
for a short time and is therefore
not hot
2. Remove residues by sliding the blade
over the surface.
3. Wipe the appliance with a damp cloth
and a little washing up liquid.
4. Rub the appliance dry using a clean cloth.
Remove
has cooled down
---
---
yes
yes
yes
Scratches or dark stains on the glass
ceramic that cannot be removed do not
however affect the functioning of the ap-
pliance.
Set the heat setting.
Check the fuse. If the fuses trip
a number of times, please call an
authorised electrician.
If the cooking zone is supposed
to be hot, call the Customer
Service Department.
If the appliance has been wrongly oper-
ated, the visit from the customer service
technician or dealer may not take place
free of charge, even during the warranty
period.
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
using
a scraper *
a scraper *
cleaner for glass ceramic
or stainless steel *
cleaner for glass ceramic
or stainless steel *
cleaner for glass ceramic
or stainless steel *
Remedy