Cleaning And Care; What To Do If; Disposal - Progress PEM6000E Notice D'utilisation

Table de cuisson électrique
Masquer les pouces Voir aussi pour PEM6000E:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10 progress

Cleaning and Care

Warning! Risk of burns from residual
heat. Let the appliance cool down.
Cleaning the appliance after each use
1. Wipe the appliance with a damp cloth
and a little washing up liquid.
2. Rub the appliance dry using a clean cloth.
Removing deposits
1. Remove heavy deposits from the hot-
plates using fine scouring powder or a
scouring pad.
2. Wipe off residues with a damp cloth.
3. Then heat the hotplate to a low temper-
ature and leave to dry.
4. To maintain the hotplates, rub in a little
sewing machine oil now and again and
then polish off with absorbent paper.

What to do if ...

Problem
The hotplates are not function-
ing
If you are unable to remedy the problem
by following the above suggestions,
please contact your dealer or the Cus-
tomer Care Department.
Warning! Repairs to the appliance are
only to be carried out by qualified service
engineers. Considerable danger to the
user may result from improper repairs.

Disposal

The symbol
on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
Possible cause
The combination appliance is
not switched on
The desired heat setting is not
set.
The fuse in the house's electrical
wiring (fuse box) has been trip-
ped.
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.
Warning! Do not clean the stainless
steel edge of the hob with scouring
powder or a scouring pad as this will
leave scratches! For stainless steel hobs
only use suitable stainless steel cleaning
and maintenance products. Please the
manufacturer's instructions.
The stainless steel edge of the plate can
be slightly discoloured as a result of ther-
mal load. This process is caused by the
physical properties.
Switch on the appliance.
Set the heat setting.
Check the fuse. If the fuses trip
a number of times, please call an
authorized electrician.
If the appliance has been wrongly oper-
ated, the visit from the customer service
technician or dealer may not take place
free of charge, even during the warranty
period.
Remedy

Publicité

Table des Matières
loading

Table des Matières