Identifying The Device Version; Nameplate - JUMO dTRANS T1000 Notice

2

Identifying the device version

2.1

Nameplate

Position
The nameplate is located on the housing surface.
(1) Device name
(3) Input – nominal measuring range
(5) Outputs
(7) Fabrication number
Part no.
The part no. clearly identifies an article in the catalog. It is important for communication between the cus-
tomer and the sales department.
Device ID
The device ID can help when localizing the device description file (IODD), which can be found on the
manufacturer's website and also downloaded if necessary.
Downloading the IODD:
1. Open the website www.jumo.de (change the language to English if necessary)
2. Use the search function to select the device
3. Under "Software", download the ZIP file containing the collection of IODDs
4. Extract all files from the ZIP folder
5. Use the device ID to locate the IODD and save it
The IODD is now available for use with the IO-Link master's configuration tool. This can be used to con-
figure and check the device.
Instead of the manufacturer's website, you can also use the address: http://ioddfinder.io-link.com.
36039 Fulda
www.jumo.net
Made in Germany
(2)
TN 00123456
(3)
MB -50...+150°C
(4)
1
2 1
2
3
4
3
(5)
4
(6)
Device ID: 0x00400_
(7)
F-Nr.: 0012345678917110123
2 Identifying the device version
dTRANS T1000
DC +18...32V
Out 2
GND
Out 1 / IO-Link
1 . 1
(2) Part no.
(4) Voltage supply
For more in-depth information, see "Techni-
cal Data"
(6) Device ID
(1)
9