Maintenance Interval Table; Maintenance And Cleaning; Cleaning; Maintenance Intervals - Grizzly EKS 1835-2 QTX Traduction De La Notice D'utilisation Originale

For safety reasons, we advise inex-
perienced users not to fell any logs
with a rail length which is smaller
than the trunk diameter.
After carrying out of the back cut, the
6.
tree falls by itself or with the aid of the
felling wedge or crowbar.
As soon as the tree begins to
fall, pull out the saw from the
section, stop the motor, place
the electric chainsaw down and
leave the workplace using the
withdrawal path.
Maintenance and

cleaning

Basically, carry out maintenance
and cleaning works with switched-
off motor and power plug re-
moved. Danger of injury!
Leave any maintenance and ser-
vicing work not covered by this
manual to our Service-Center.
Use only original spare parts�
Allow the machine to cool down
before all maintenance and clean-
ing works. Danger of burn injuries!

Maintenance Interval Table

Machine part
Components of the
chain brake
Sprocket chain wheel Check, replace if required
Saw chain
Guide bar
.
Action
Check, replace if required
Check oil, regrind or replace if
required
Check, turn round, clean and oil
Cleaning
• Clean the machine thoroughly after
every use. In this way, you extend the
life of the machine and avoid accidents.
• Keep the gripping handles free of gas,
oil or grease. Clean the gripping han-
dles, where appropriate, with a moist
cloth soaked in soap. Use no solvents
or gas for cleaning!
• Clean the saw chain after every use.
Use a paint brush or whisk for that. Do
not use any liquids to clean the chain.
After cleaning, oil the chain lightly with
chain oil.
• Clean the ventilation slots and the
surfaces of the machine with a paint
brush, whisk or dry cloth. Do not use
any liquids for

Maintenance intervals

Regularly carry out the maintenance opera-
tions listed in the following table. The life of
the saw is extended by regular maintenance
of your chainsaw. Furthermore, you get
optimum cutting performance and avoid ac-
cidents.
Before
every use
cleaning..
After 10 hours
of operation



 
GB
117