Guarantee - Grizzly EKS 1835-2 QTX Traduction De La Notice D'utilisation Originale

Tronçonneuse électrique
Masquer les pouces Voir aussi pour EKS 1835-2 QTX:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 65
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool
is turned on but is running idle).
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
This device is designed for opera-
tion on a power supply network with
a system impedance Zmax at the
transfer point (domestic connection)
of a maximum of 0.170 Ohms.
The user must ensure that the device
is operated only on a power supply
network that fulfils this requirement.
If necessary, the local power supply
company can be asked for the sys-
tem impedance.

Guarantee

This unit has a guarantee period of
24 months. Commercial use will invalidate
the guarantee.
Damages, which can be attributed to
natural wear, overloading or inappropriate
use, are excluded from the guarantee.
Certain component parts are subject to a
normal wear and are excluded from the
guarantee. In particular, these include:
Saw chain, chain bar, sprocket chain
wheel and carbon brushes, provided that
the complaints cannot be attributed to
flaws in the materials themselves. Also,
all damage to the machine, the saw chain
and the chain bar, which can be attributed
to inadequate lubrication, are excluded
from the guarantee.
Furthermore, a condition of the guarantee
services is that the maintenance intervals,
indicated in the operating instruction, have
been adhered to and the instructions on
the cleaning,
care and maintenance have
been followed. Damages, which originate
due to material or manufacturer faults, will
be repaired free of charge by replacement
delivery or repair. This is conditional upon
the device being returned in one piece
complete with proof of purchase and guar-
antee to our service centre..
GB
121

Publicité

Table des Matières
loading

Table des Matières