Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.
Safety regulations
Failure to comply with the following safety instructions, in addition to errors in
handling the device, can result in serious injuries.
Be informed!
Read
carefully
device.
Protect yourself!
Always wear eye, face and hand
protection
gloves) when working.
Attention: Strap can break!
The strap can break during
tightening! Do not stand in the
path of the strap. Make sure that
no one else is in the working
area.
Use only lifting gear that
complies with the safety
regulations!
Use only original TITAN
replacement parts!
The use of other than original
TITAN replacement parts will
void the warranty and all liability.
Do not exceed air pressure!
max. 6 bar
Never exceed the max.
permissible air pressure of 6
bar.
The use of straps other than
recommended
broken
tightening
insufficient strapping. Use only
corresponding
products from TITAN!
PKE
the
operating
manual
before
using
the
(cut-resistance
can
result
straps
during
the
process
and
quality
H228 EU 21/06
Caution: Danger of crushing!
Do not insert fingers into the
pulley area.
Caution:
Strap only objects to be
packed!
Make sure that no hands or
other body parts are between
the strap and the goods to be
packaged.
Attention: Strap flies outward!
When cutting the strap, hold the
top part firmly and stand to the
side.
Attention: The lower part of the
strap will fly outward.
Use original connection
couplings! Use only connection
couplings that comply with the
safety regulations.
Do not use gas or
compressed air cylinders!
Do not connect the tool to a gas
or compressed air cylinder.
This tool may be operated only
in
by personnel who have been
trained
consult your TITAN packaging
consultant if you have any
questions about this.
accordingly.
Please
23 / 59
Publicité
Chapitres
Table des Matières
