Tractel Davitrac Serie Manuel D'installation, Utilisation Et Maintenance page 16

Davitrac™ jib crane:
Position
EN
P 1: 27.5" (700 mm)
P 2: 21.65" (550 mm)
P 3: 15.75" (400 mm)
Self-stabilizing base
Position
A1
A2
Davitrac™
Double pulleys head
Self-stabilizing base
Mounted floor base
Wall mounted base
Clearance mural base
Flush floor base
IMPORTANT:
The Davitrac™ jib crane may be used as a fall protection anchor device (ANSI Z359.18-2017 and
CSA Z259.15-17) and may be fitted with
•
fall arrest systems in accordance with OSHA 1926.502 ,
•
rescue lifting devices in accordance with NSI Z359.18-2017 and CSA Z259.15-17,
•
rope-suspended working devices.
In such a configuration, it may not be used simultaneously as an anchor point for lifting equipment.
OR
The Davitrac™ jib crane may be used as a lifting anchor point; in such a configuration, only one
operator can connect to one of the anchor points on the articulation plate (ref. I2, fig 2)
16
Technical specifications
Table 1 - Dimensions (fig. 1)
Table 2 - Davitrac™ compositions with bases
DT1000
T90DP
T90DAVI-PHB
T90DAVI-MFA
T90DAVI-WMA
T90DAVI-CMA
T90DAVI-FFA
Headroom H
64.5" (1640 mm)
59.8" (1520 mm)
55" (1400 mm)
Width
66.1" (1680 mm)
55.2" (1404 mm)