Programming A User Key With Deadbolt Lock Function - Häfele DT 600c Instructions D'utilisation

8.3 Programming a user key with deadbolt lock function

Tag-it ™ISO
Prerequisites:
1. Hold the programming key card in front of the
antenna.

Acoustic signal is heard. LED flashes blue
for max. 5 seconds.
3. Hold the programming key card in front of the
antenna again during the 5-second period.

Acoustic signal is heard again twice. LED
flashes blue even more slowly.
5. Remove user key.

LED continues to flash blue slowly.
7. Repeat steps 4 to 6 until all necessary user keys have been granted the locking authorisation.
8. The LED switches off once the 5 seconds have elapsed.
Programming key card
5 s
2. Hold the programming key card in front of the
antenna again during this 5-second period.

2x 1x/s
4. Hold the user key in front of the antenna during
the 5-second period.

1x/s
6. Hold another user key in front of the antenna
during the 5-second period.


User keys
2x
Acoustic signal is heard twice. LED flashes
blue more slowly.
Acoustic signal is heard. LED briefly
illuminates blue. Locking authorisation is
allocated.
Acoustic signal is heard. LED briefly
illuminates blue.
Locking authorisation is allocated.
2x/s
1 s
1 s
55