Programming A Normal User Key - Häfele DT 600c Instructions D'utilisation

8.1 Programming a normal user key

Tag-it ™ISO
Prerequisites:
1. Hold the programming key card in front of the
antenna.

Acoustic signal is heard.

LED flashes blue for max. 5 seconds.
3. Remove user key.

LED flashes blue for a further 5 seconds.
5. Repeat steps 2 to 4 until all necessary user keys have been granted the locking authorisation.
6. The LED switches off once the 5 seconds have elapsed.
Programming key card
5 s
2. Hold the user key in front of the antenna during
this 5-second period.

Acoustic signal is heard. LED briefly
illuminates blue.

Locking authorisation is allocated.
5 s
4. Hold another user key in front of the antenna
during this 5-second period.

Acoustic signal is heard. LED briefly
illuminates blue.

Locking authorisation is allocated.
User keys
1 s
1 s
53