Functions; Factory Settings - Häfele DT 600c Instructions D'utilisation

6. Functions

Latchbolt lock operation / self-locking action (= factory setting)
In latchbolt lock operation, the door terminal is unlocked during the open time of 3 seconds.
The terminal then locks again automatically once the open time has elapsed (self-locking
action).
Deadbolt lock operation (permanent open)
In deadbolt lock operation, the door terminal is permanently unlocked (permanent open).
The terminal is locked again by presenting one of the user keys that is authorised for deadbolt
lock operation again.
Macros
Macros are programs that extend the functional scope of the terminal. Customer-specific
requirements can be implemented on request using macro programs.
The transfer to the terminal takes place via the MDU 110.
If you have any questions concerning the development or functionality of the macros,
please contact your responsible DIALOCK technician or visit www.hafele.com.

6.1 Factory settings

Parameter
Open time (duration of unlocking period in latchbolt lock operation)
• The open time can be set to up to 30 seconds at one second intervals
in stand-alone operation
• The open time can be extended to beyond 30 seconds using a macro
with the MDU 110 mobile programming unit with special functions.
Lock type
48

8.4 Adjusting the open time, page 56.
Value
3 seconds
Latchbolt lock operation