Programming A Privileged User Key - Häfele DT 600c Instructions D'utilisation

8.2 Programming a privileged user key

Prerequisites:
1. Hold the programming key card in front of the
antenna.

Acoustic signal is heard.

LED flashes blue for max. 5 seconds.
3. Hold the user key in front of the antenna during
the 5-second period.

Acoustic signal is heard. LED briefly
illuminates blue. Locking authorisation is
allocated.
5. Hold another user key in front of the antenna
during the 5-second period.

Acoustic signal is heard. LED briefly
illuminates blue.

Locking authorisation is allocated.
6. Repeat steps 3 to 5 until all necessary user keys have been granted the locking authorisation.
7. The LED switches off once the 5 seconds have elapsed.
54
Tag-it ™ISO
Programming key card
5 s
1 s
1 s
User keys
2. Hold the programming key card in front of the
antenna again during this 5-second period.

Acoustic signal is heard twice. LED flashes
blue more slowly.
4. Remove user key.

LED continues to flash blue slowly.
2x 2x/s
2x/s