Programming User Keys - Häfele DT 600c Instructions D'utilisation

8. Programming user keys

An authorised user key is needed to open the door terminal. Locking authorisation must be
allocated to this user key.
The following user keys can be programmed:
User key
Normal user key
Privileged user key
User key with
deadbolt lock function
52
Locking authorisa- Functionality
tion
Latchbolt lock • Opens all door terminals for which the user key has
operation (with
self-locking action)
• Open door terminals then lock automatically once
Latchbolt lock • Functions like a normal user key
operation (with
• Also required by privileged persons for configuring
self-locking action)
• Also opens door terminals with activated "Do not
Deadbolt lock • Functions like a normal user key
operation
• Also has a permanent open function: If the user key
(permanent open)
• Open terminals are locked again by presenting one
locking authorisation.
the open time has elapsed.
the door terminal with the MDU 110 data transfer
unit.
disturb" (DND) function when presented for a longer
period
is held in front of the antenna for a longer period, the
open door terminals are set to "permanent open".
of the user keys that is authorised for the deadbolt
lock function again (> 2 seconds).