Electrical Safety; Technical Data - Häfele DT 600c Instructions D'utilisation

2.7 Electrical safety

• Perform mounting and installation work without batteries.
• Do not carry the product by the cable.
• Check all components for damage prior to assembly and operation. Do not use any
damaged components; file a complaint with the manufacturer.
• Do not modify or replace the plug or cable.
• Do not trap, kink or damage the cable. Do not place the cable over sharp edges or corners.
Keep the cable a sufficient distance away from movable or rotating parts.
• Do not open the housing of the product components.
• Never immerse the product components in water or other liquids.
• Only use undamaged batteries.
• Replace discharged batteries immediately to avoid battery acid leakage.
• Remove leaking batteries immediately and dispose of them properly in accordance with
national regulations. Avoid contact with the battery acid.

3. Technical data

Feature
Power supply
Internal backplate dimensions
Exterior module dimensions
Ambient temperature
Ambient temperature
(outdoor version)
Relative humidity
Transponder technology
Approvals
Tested to (DT 600c FH only):
Degree of protection
Degree of protection
(outdoor version)
Value
2x 1.5 V Mignon battery AA (LR6) alkaline
Type E91 Energizer industrial
(Häfele Cat. No.: 910.54.980)
L 248 mm x W 35 mm x H 10 mm
L 332 mm x W 35 mm x H 23 mm
0 – 55 °C
-10 – 55 °C
10 – 95 %, not condensed
Tag-It, Mifare Classic EV1, Mifare DESFire EV1/EV2
• CE
• EN 179: Only for DT 600c FH with U-lever handle and approved
BKS mortice lock
• EN 1125: Only for DT 600c FH - EN 1125 in conjunction with
approved BKS components
DIN 18273
IP 40
IP44
41