Connecting Data; Warranty And Liability - Grammer MSG87/722 Mode D'emploi

Connecting data

If you need to connect cables to the vehicle supply network, strictly observe the following
• • • •
instructions:
Before you connect an electrical consumer fitted in the driver's seat (e.g. the seat
heater or the seat ventilation), you must obtain the relevant electrical data for the
respective vehicle with reference to voltage, protection and the kind of connections from
the manufacturer, from GRAMMER AG or the company's agencies.
For safety reasons, the installation and connection to the vehicle supply network must be
carried out by authorized specialist personnel only.
The seat connections must be protected independently of other vehicle components.
DC Seat heater
12V 10A
24V 4A
For building an electric connection, select an electric circuit by means of which the electric
consumers of the driver's seat are separated from the live network when the ignition is
switched off.

Warranty and liability

GRAMMER AG does not extend any guarantee or accept any liability for damage resulting
• • • •
from incorrect assembly, use or repair of the driver's seats.
Further details on the claims admitted by GRAMMER AG are stated in your contractual
• • • •
documents (see invoice or delivery note). Claims against GRAMMER AG other than the
claims described there are excluded.
GB
Safety instructions
23