Eliminating Malfunctions - Festo DGE-ZR-RF Série Notice D'utilisation

DGE− −ZR−RF
11

Eliminating malfunctions

Malfunction Possible cause
Imprecise
positioning
Loud running
noises noises
Festo DGE− −ZR−RF 0906d English
Tooth overjumped due to high
inertial forces
Toothed belt damaged
Reference point switch loose or
switching lug loose
Outside the axis
Fastening of interface to effective
load on slide loose
Clamping hub spins
Play in roller guide
Defective bearing of shafts, etc.
Roller guide damaged
Play in roller guide
Insufficient lubrication
(of the slide bearing)
Toothed belt damaged
Outside the axis (e.g. motor
including motor mounting kit or
external devices)
Wear on the actuating lug
Remedy
Reduce dynamic loading, new
homing run, if necessary return to
Festo
Return product to Festo
Fasten
Check the peripherals
(e.g. motor, controller...)
Fasten again as described in the
Fitting" chapter
Check how the motor mounting kit
is fitted (coupling)
Return product to Festo
Return product to Festo
Lubricate, if necessary return
product to Festo
Return product to Festo
Check peripherals for parts in
contact with each other
Return product to Festo
55