Festo DGE-ZR-RF Série Notice D'utilisation page 36

DGE− −ZR−RF
Installing the product:
Select the necessary mounting position.
S
Check whether additional protection against entry of drops (grease, oil, water)
S
and particles is needed.
Installation
position
Fig. 8
Fitting in a vertical or sloping position:
Warning
Masses falling suddenly can cause personal
injury and material damage (crushing).
If there is a power cut or if the toothed belt
breaks, the work load will slide down.
S Make sure that you only use motors with
an integrated spring−loaded holding brake.
S Check whether additional external safety
measures are required to prevent the work
load from sliding down (e.g. toothed
latches, moving bolts or emergency
buffers).
36
Protection against penetra
tion of drops and particles
Low Better
Vertical, Diagonal or
diagonal or horizontal with
horizontal with toothed belt at
toothed belt bottom
on top
Fig. 7: Low Better
Fig. 9
Festo DGE− −ZR−RF 0906d English