Festo DGE-ZR-RF Série Notice D'utilisation page 34

DGE− −ZR−RF
4 Conditions for the safe use of the product
Warning
Unexpected fast−moving masses can cause injury to people or damage to
property (danger of fingers being crushed).
S Apply power to the drive motor, at first limited to low speeds and torques.
Note
Malfunctions will occur if the device is not used correctly.
S Make sure that the specifications in this chapter are always observed.
In this way the product will perform as intended.
Compare the maximum values specified in these operating instructions with
S
those of your actual application (e.g. forces, torques, temperatures, masses,
speeds).
Operation of the product in compliance with the relevant safety regulations is
contingent on adherence to the load limits.
Take into consideration the ambient conditions at the location of use.
S
Corrosive elements in the environment (e.g. ozone) will reduce the service life of
the product.
Please comply with national and local safety laws and regulations.
S
Remove transport packaging such as foils and cardboard.
S
It is intended that the packaging be recycled on the basis of its constituent
materials (exception: oiled paper = other waste).
Unauthorised product modification is not permitted.
S
Note the warnings and instructions on the product and in the relevant
S
operating instructions.
Take the tolerance of the tightening torques into account. Unless specified
S
otherwise, the tolerance is ±20 %.
34
Festo DGE− −ZR−RF 0906d English