Replacing Fuses - BIG ASS FANS 2025 Manuel D'installation

Replacing fuses

WARNING: Ensure power is disconnected before replacing fuses.
CAUTION: Do not touch the fan's electronics unless necessary!
To replace the fuses on the main fan unit, remove the electronics cover from the fan as shown. The electronics
cover is attached to the fan with four screws. Gently twist and pull out the appropriate fuse holder, and then
replace the fuse. Reinstall the fuse holder, and then reattach the fan's electronics cover. See below for fuse
recommendations.
32
Electronics
Cover
Suitable Fuse Replacements
250 VAC, 10 A (AC Mains Supply)
• Schurter 0034.2526
• Cooper/Buss S505-10-R
• Littelfuse 0234010.
WWW.BIGASSSOLUTIONS.COM © 2015 DELTA T CORP. ALL RIGHTS RESERVED.
Fuse Holders