Step 13 Start Icemaker; Step 14 Install Toekick - Monogram ZIC360NHLH Instructions D'installation

Installation Instructions - Standard Installation

STEP 13 START ICEMAKER

CAUTION
Avoid contact with the moving parts
of the ejector mechanism, or with the heating element
(located on the bottom of the icemaker) that releases
the cubes. Do not place fingers or hands on the
automatic ice making mechanism while the freezer is
plugged in.
ATTENTION
Évitez tout contact avec les pièces
mobiles du mécanisme d'éjection, ou l'élément chauffant
(situé dans le bas de la machine à glaçons) qui libère les
glaçons. Ne placez pas les doigts ou les mains sur le
mécanisme de production de glace automatique lorsque le
congélateur est branché dans la prise électrique.
PRECAUCIÓN
movimiento del mecanismo expulsor o con el elemento de
calefacción (ubicado en la parte inferior de la máquina de
hielo) que expulsa los cubos. No coloque los dedos ni las
manos en el mecanismo de la máquina de hielo automática
mientras el freezer se encuentre enchufado.
Power
Switch
• The icemaker will begin operation automatically.
• Be sure nothing interferes with the sweep of the feeler
arm.
• Discard the first full bucket of ice cubes.
• To turn the icemaker off, slide the switch to O (OFF).
31-49142 Rev. 2
Evite el contacto con las partes en
Icemaker
Feeler Arm

STEP 14 INSTALL TOEKICK

• Locate the supplied toekicks (shipped taped to the
side of the refrigerator.
• The narrower set of toe kicks will be used with
standard installation. You can discard the other set of
toe kicks.
• Install the toekick assembly with the 2 screws
provided, adjust to the desired height and tighten the
screws.
IMPORTANT: A custom toekick can be installed to
match or complement the surrounding cabinetry but
can NOT cover the horizontal vent slots of the factory
toekick.
21