STEP 12 INSTALL DOOR AND
DRAWER PANELS (cont.)
10. Repeat steps 5-9 for the freezer drawer.
11. Repeat steps 5-9 for the customizable drawer.
12. Tighten all screws once you are satisfied with the
panel alignment.
13. Slide on trim to hide the panel adjustment hardware.
Align trim with bracket
14. Add trim caps to cover the ends of the trim.
Installation Instructions
Trim
STEP 13 START ICEMAKER
Press the zone indicator on the control pad twice
to select the freezer drawer. Press the ICE icon on
the right side of the control. A line will appear under
ICE to show that the icemaker is ON.
Be sure nothing interferes with the sweep of the
feeler arm.
Discard the first full bucket of ice cubes.
To turn the icemaker off, press the ICE icon. The
word OFF appears below ICE to show that the
icemaker is OFF.
18
31-1000169 Rev. 1