Optional Accessory Kits - Monogram ZIC360NHLH Instructions D'installation

3/4" (1.9 cm) RAISED GRILLE PANEL ROUTING
For 3/4" (1.9 cm) raised grille panel, routing is required. The router depth is 1/4" (0.63 cm) all the way around the
panel back. Additional panel width reductions are required per the diagrams below. This will create a "picture frame"
routing that will slide onto the attached grille trim.
TOP
Back Front
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
LEFT
SIDE
NOTE: For panels constructed with rails and stiles (5-panel), the minimum width is 3" (7.62 cm) for rails and 4" (10.16 cm)for stiles.

Optional Accessory Kits

• ZKHCSS2: Monogram Tubular Stainless Steel handles
designed to fit 3/4" (1.9 cm) overlay panels. This kit also
includes a handle side trim for custom handles.
• ZKHPSS1: Professional Tubular Stainless Steel Handle
designed to fit 3/4" (1.9 cm) overlay panels. Kit includes
one handle. Order 2 kits for bottom-freezer refrigerators
from your Monogram supplier.
Design Guide - Flush Installation
1-11/16"
3/16"
DETAIL BOTTOM
DETAIL
LEFT SIDE
ROUTER DEPTH 1/4"
2-1/16"
DETAIL TOP
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
• ZUG2: For side-by-side installation of two trimmed
bottom-freezer refrigerators. This kit provides for the
installation of a unified custom grille panel to span the
width of two units using a framed or overlay panel.
• ZKHCT: Handle side trim for left-hand and right-hand
doors. For use on custom panels when using a custom
handle.
28
NOTE: Routed areas should be
finished as they may be visible
when assembled.
Front
Back
CORNER VIEW SHOWING
"PICTURE FRAME" ROUTING
DETAIL RIGHT
SIDE
ROUTER DEPTH 1/4"
2-1/16"
RIGHT
SIDE
31-49142 Rev. 2