Monogram ZIC360NHLH Instructions D'installation page 27

3/4" (1.9 cm) RAISED FREEZER DRAWER PANEL ROUTING
For 3/4" (1.9 cm) raised door panel, routing is required. The router depth is 1/4" (0.63 cm) all the way around the
panel back. Additional panel width reductions are required per the diagrams below. This will create a "picture frame"
routing that will slide onto the attached door trim.
TOP
Front
Back
LEFT
SIDE
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
NOTE: For panels constructed with rails and stiles (5-panel), the minimum width is 3" (7.62 cm) for rails and 4" (10.16 cm)
for stiles.
31-49142 Rev. 2
Design Guide - Flush Installation
DETAIL TOP
11/32"
1/4"
3/16"
DETAIL BOTTOM
DETAIL
LEFT SIDE
ROUTER DEPTH 1/4"
2-1/16"
3/4"
9/16"
1/4"
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
27
NOTE: Routed areas should be
finished as they may be visible
when assembled.
Back
CORNER VIEW SHOWING
"PICTURE FRAME" ROUTING
DETAIL RIGHT
SIDE
ROUTER DEPTH 1/4"
2-1/16"
Front
RIGHT
SIDE