Main Screen - Fagor PS-50/200-260-330 TP2 Manuel D'utilisation

3.2.2.

Main screen

1
7
1. Machine identification
2. Time
3. Main menu: Access to the menus (programme management, maintenance menu,
configuration and statistics).
4. Selected programme name
5. Selected programme temperature: The indicated temperature is the working
temperature for the selected programme.
6. Programme number and details (speed or AUTO or HPS or folding machine
depending on the enabled options)
7. Programme selection
8. Start: Button to start the selected programme.
3.2.3. Details of pre-installed programmes
The dryer ironer has 5 pre-installed programmes detailed in the table below.
When running, the parameters (temperature and speed) and the operating mode (AUTO, HPS
or folder if the machine is equipped and the options activated) can be changed at all times
(except at the start of a programme if the temperature is below 130°C - the parameter can be
modified in the maintenance menu, in this case the speed cannot be modified).
The changes made can be saved to the same programme or saved under a different
programme name (see section 3.3.4)
Pre-installed programmes
Programme n°
1
2 50% very crumpled cotton
3 100% very crumpled cotton
4 100% slightly crumpled cotton
5 50% slightly crumpled cotton
2
4
6
8
Programme name
Standard
5
3
7
Speed Temperature
(m/min) (°C)
3 165
4.5 160
3 180
5 180
6.5 160
23