Radiant Burner (Ps-50 Tp2 Option) - Gr - Fagor PS-50/200-260-330 TP2 Manuel D'utilisation

Gas nature
Supply pressure (mbar)
Machine type
Injector mark
Air adjustment "d" (mm)
Burner flow (m³/hour)
Power (KW)
Gas type
Supply pressure (mbar)
Machine type
Injector mark
Air adjustment "d" (mm)
Burner flow (Kg/h)
Power (KW)

2.2.5.2 Radiant burner (PS-50 TP2 option) - GR

This type of burner is standard on PS-65 TP2 models.
The GAS connection is on the right part of the machine. The GAS connection diameter is 1/2''
(15/21 mm). The gas supply hose (not supplied) must pass through the back of the machine
through one of the holes in the frame.
G20
20
PS- PS- PS-
50/200 50/260 50/330
4.7 5.5 6.2
18 18 18
4.2 5.8 7.3
40 55 69
G31
37
PS- PS- PS-
50/200 50/260 50/330
3.2 3.7 4.1
18 18 18
3.1 4.3 5.6
40 55 69
Used to adjust the air setting "d"
Injector location
GAS connection
G25
20
PS- PS- PS-
50/200 50/260 50/330
5.1 6.2 6.9
0 0 0
4.9 6.8 8.5
40 55 69
G31
50
PS- PS- PS-
50/200 50/260 50/330
3 3.4 3.8
18 18 18
3.1 4.3 5.6
40 55 69
Distance "d" depending
on the nature and type of
GAS
G25
25
PS- PS- PS-
50/200 50/260 50/330
4.9 5.8 6.5
0 0 0
4.9 6.8 8.5
40 55 69
15