Installation - Fagor PS-50/200-260-330 TP2 Manuel D'utilisation

Machine Type
Weight (KG)
Weight with folding
machine (KG)
Floor surface area (m²)
Static stress (daN/m²)
Static stress with folding
machine (daN/m²)

2.2.3. Installation

The machine is delivered on 2 beams which must be removed when it is placed in its final
working location as shown below. Then follow the instructions below step by step.
Then, using a pallet transporter, slightly raise the machine at the location indicated below (off-
centre) to remove the bolts from the beams.
Straight
frame
Place the pallet transporter forks here to raise the machine.
Then move the beam slightly so that it is no longer under the
frame.
Then place the machine on the beams, move the pallet transporter to the side of the machine.
Place the forks completely under the frame to raise the machine, remove the beam and then
slowly lower the machine until it is in contact with the ground.
PS-50/200 PS-50/260 PS-50/330 PS-65/200 PS-65/260 PS-65/330
930 1180
1170 1465
3.27 3.87
284 305
358 379
Beams
1430 1189
1790 1429
4.79 3.27
298 363
374 437
Nuts
First, remove the side panels and remove the 2
nuts securing the beams on each side of the
machine as shown above.
1517 1765
1802 2125
3.87 4.79
392 368
466 444
10