Identification Plate; Installation - Fagor PS-50/200-260-330 TP2 Manuel D'utilisation

2. TECHNICAL INSTALLATION INSTRUCTIONS
2.1.

Identification plate

The identification plate on this appliance is located in the upper part of the left frame. It
indicates:
- The machine type and serial number
- Electric specifications (Voltage, power, protection)
- Total power
- GAS specifications (GAS type, pressure ...)
- The required steam pressure (if steam heating machine)
2.2.

Installation

Caution : the machine must be installed, adjusted and commissioned by a team of
technicians from the manufacturer or by technicians or dealers who are approved by the
company.
Similarly, the presence of the customer is strongly recommended, in particular during the
installation and the first tests.
The appliance must be installed in compliance with applicable regulations and standards in
sufficiently ventilated premises.
Location of the
identification plate
Back view
8