User Manual
The speed and depth of the modulation can be adjusted for each Style. To access the setting page, select
the TREMULANTS field under the STYLES menu:
That show the current SPD (speed) or DPT (depth) and values of the manuals' tremulant.
Press [EXIT] to go back to the STYLES menu and save the new settings.
IMPORTANT NOTE
Any general combination and Tutti can recall the tremulant Depth and Speed parameters. To save
Depth and Speed to combinations, activate the corresponding option through the
COMBINATIONS function (see par. 5.6).
6.2 REGULATING THE VOLUME OF EACH VOICE
(VOICES VOLUMES function)
The volumes for each single stop can be adjusted in a range of -12 dB to +6 dB, and allows a perfect
balance of the overall sound of the organ.
Select the VOICES VOLUMES field, in the STYLES menu. The display will show the organ sections,
select the section that contains the voice you wish to adjust:
Use the buttons [FIELD
A quick alternative to adjust the volumes is pressing and holding the desired stop for a few seconds. This
can be done both on this page or on the volume settings page.
During the edit the stop will be on and can be played for better, quicker adjustment. Other stops can also
be switched on to assess the overall effect of the changes. To quit the function and save the values press
[EXIT]. The changes made will be automatically saved in the current organ style.
], [FIELD
] and [ENTER] to select the field.
EN - 26