Stiebel Eltron SOL 23 PLUS Utilisation Et Installation page 33

Fit sealing strips (10) on both sides and
T
at the top. The rectangular part is to point
towards the collector.
Cut into the sealing strips (10) where the tile
overlaps. This will ensure that the tiles fit
better.
Fit protective lead flashing (2) at the top to
U
protect the area to be covered by the two tiles
at the edge so that no water can penetrate
the roof.
Cover the roof area around the collector
V
array.
T
Sealing strip (10)
U
V
Sealing strip (10)
Piece of lead flashing (2) hammered in
33