Birchmeier Accu 285-15 Mode D'emploi page 17

Warranty
We make a warranty of 24 months from the date of sale. During this warranty period we will repair free of
charge defects of the sprayer which are due to deficiencies in material and manufacturing, either by
repair of replacement of parts, or of the entire sprayer.
 Prerequisite to the honoring of warranties is the appropriate storage and use of our equipment strictly
in accordance with the operating instructions which were valid on delivery (including the instructions
given on the appliances themselves). These instructions constitute an integral part of our contract.
Any and all damages which fall within our scope of responsibility must be reported to us in writing
immediately after they have been discovered.
 Expressly excluded from the warranty and liability are damages and deficiencies:
 Resulting from the non-adherence to our instructions and usage recommendations in the operating
manuals such as the improper use or inadequate maintenance of our equipment;
 Resulting from chemical attack, or due to normal wear;
 Due to damages, the causes of which are beyond the scope of our responsibility and influence, e.g.
mechanical damage, higher force.
 The warranty becomes null and void and any and all liabilities are disclaimed if the user or any third
party alters or makes inexpert repairs to the sprayer.
 Excluded from the warranty and liability are all incidents which extend beyond the obligations set forth
above. Any and all liability is expressly excluded to the extent of the law. Expressly excluded is in
particular any and all liability for damages which are purely asset-related such as lost profit, loss of
use, operating outage etc.
 For further information on handling or the maintenance of the sprayer please consult your dealer.
Vérifiez si le joint de couvercle est à sa place et fermez bien le couvercle. Cela garantit la pression
nécessaire et évite de même le gâchis du produit à pulvériser.
Couvercle de remplissage
Dispositif d'arrêt
En pesant le dispositif d'arrêt, vous enlevez le blocage et permettez d'actionner la poignée.
Dispositif d'arrêt
Pulvérisation
 Actionnez le levier de la poignée.
 Le mouvement du levier ouvre la soupape et la pulvérisation peut commencer.
 Le levier déchargé ferme la soupape et termine la pulvérisation.
En actionnant la poignée accroissez
Contacteur d'échange pour la pulvérisation du point / pulvérisation continuée
Dépendant l'application mettez le contacteur sur pulvérisation de point ou pulvérisation continuée.
fermer solidement
En soulageant la poignée accroissez