Log; 6.3.10 Info; Automatic Logout - Sartorius Stedim Biotech BioWelder Total Containment Mode D'emploi

32 Operation
6.3.9

Log

For general information about logs, please read Chapter 9 .7 Log
Through the Info menu logs can be downloaded to the computer .
Selection Meaning
Weld (CSV) Weld log as CSV file
Weld (HTML) Weld log as HTML file
All Raw log data
When outputting logs via Web browser, not all data saved in the device is out-
putted. The most current log is output up to a file size of around 500 kB.

6.3.10 Info

Detailed information can be downloaded in this menu . The following table lists
this information:
Function Meaning
State The current status of the device can be downloaded and
viewed via the Download button .
Download log files A log file can be downloaded and opened by pressing the
corresponding selection button . Further details can be found
in Chapter 6 .3 .9 Log .
Maintenance Informs you about the abrasion condition of maintaining
parts . If the wearing down of one or more parts has reached
≥100%, an information will occur on the operator screen .
Refer to Chapter 5 .5 Maintenance .
Date and Time see Chapter 6 .3 .7 Date and time .
6.4

Automatic Logout

Login and automatic login is already described in chapter 6 .2 .9 User management and
6 .3 .8 User management .
The automatic logout feature is based on CFR21 Part 11 . After a certain time
without user interaction, the machine logs out automatically . Changes not saved
will be discarded . However, there are certain exceptions .
No user interaction is required during a process (e . g . welding) . The time starts counting
after the weld is completed . Weld log screen or screen for removing the blade do
not count to the process . If the timer runs out during one of those screens, the login
screen will appear after the last screen (remove blade) .
The same situation is by the validation or initialisation . No user interaction is needed
as long as the BWTC is doing some work (moving motors or heating) . After the work
is done (waiting for the user to do something) the logout timer is running . The login
screen will appear immediately after time run out or after some ending up user inter-
action (e .g . removing the blade) .
The timer can be adjusted in the web interface under general parameters . If a user
has the automatic login, the automatic logout is deactivated .