Daily Maintenance; Cleaning Of The Recovery Tank; Cleaning Of The Recovery Tank Filter - COMAC OMNIA 26 Mode D'emploi

Masquer les pouces Voir aussi pour OMNIA 26:

Table des Matières

Les langues disponibles

1. Empty the recovery tank completely

2. Empty the solution tank completely and lift it up to its vertical position blocking it

through the suitable prop

3. Unscrew the wing nuts of the recovery tank cover, rotate it of 90 ° and take it off

4. Take off the rear plug of the recovery tank (1)

5. Take off the exhaust hose from its seat and unscrew the plug (2)

6. Clean the inside of the recovery tank with a water jet

7. Reassemble everything repeating inversely above-mentioned operations

1. Empty the solution tank completely and lift it up to its vertical position blocking it

through the suitable prop

2. Unscrew the filter cover rotating it counterclockwise

ATTENTION! Do not let in water into the hose connected to the filter

ATTENTION!

cover

Extract the filter body from its housing and rinse it thoroughly

Reassemble everything repeating inversely above-mentioned operations

DAILY MAINTENANCE

Table des Matières

Table des Matières

Omnia 32 Omnia 42