Machine Preparation; Handling Of The Packed Machine; How To Unpack The Machine; Cable Connection Traction Motor - COMAC OMNIA 26 Mode D'emploi

1. 1. 1. 1.

HANDLING OF THE PACKED MACHINE

HANDLING OF THE PACKED MACHINE HANDLING OF THE PACKED MACHINE HANDLING OF THE PACKED MACHINE
The machine is packed in a specific package provided on a pallet for the handling with
fork trucks. The packages cannot be placed on top of each other.
The total weight is 277 kg for OMNIA26, 312 kg for OMNIA32 and 327 kg for OMNIA42.
The overall dimensions are:
2. 2. 2. 2.

HOW TO UNPACK THE MACHINE

HOW TO UNPACK THE MACHINE HOW TO UNPACK THE MACHINE HOW TO UNPACK THE MACHINE
1. Take off the outer package
2. The machine is fixed on the pallet with metallic brackets
3. Take off these brackets and possible wedges which block the wheels
Note Note Remember to reset the fastenings removed to take off the brackets Note Note
4. Using a chute, get the machine down from the pallet, pushing it in reverse motion.
Avoid violent blows to the base
5. Keep the pallet and the fixing brackets for eventual transport necessities
3. 3. 3. 3.

CABLE CONNECTION TRACTION MOTOR

CABLE CONNECTION TRACTION MOTOR CABLE CONNECTION TRACTION MOTOR CABLE CONNECTION TRACTION MOTOR
A technician of the Comac service dept. must carry out this operation.

MACHINE PREPARATION

MACHINE PREPARATION
MACHINE PREPARATION MACHINE PREPARATION
A: A: A: A: 1260 mm
B: B: B: B: 1000 mm
C: C: C: C: 1740 mm
32