Maintenance; Waste Disposal; If Malfunctions Occur; Technical Data - Aventics DDL Mode D'emploi

86 AVENTICS | DDL, CL03/CL03-XL | R402003658–BDL–001–AE

If malfunctions occur

General data
Dimensions
Weight
Operating temperature range
Storage temperature range
Protection acc. to
EN 60529/IEC529
Compressed air quality
Workingpressure
Nominal flow
Mounting orientation
9.2

Maintenance

The bus coupler is maintenance-free.
O
Comply with the maintenance intervals and specifications
for the entire system.
9.3

Waste disposal

Dispose of the device in accordance with local regulations.
10 If malfunctions occur
In case of malfunction, refer to "Test and diagnosis" on page 75
for troubleshooting. Refer to "Replacement" on page 82 for
information on how to replace a faulty bus coupler.

11 Technical Data

Depends on configuration; see online catalogue.
Depends on configuration; see online catalogue.
0 C to +50 C, without condensation
–20 °C to +70 °C
When assembled: IP69K
To DIN ISO 8573-1, class 6, 4, 3 or lower
Solid pollutants: 5 µm
Dew point: 3 °C
Oil content: 1 mg/m
2,5 - 10 bar
950 - 1100 std. l/min, depending on valve type and subbase at 6 bar
pilot pressure, 1 bar
Any
3