Hilti HIT-RE 500 V4 Mode D'emploi page 54

European technical assessment E T A - 2 0 / 0 5 4 1
English translation prepared by CSTB
Table C25: Essential characteristics for internally threaded sleeve HIS-(R)N under
tension load for seismic category C1 in concrete
HIS-(R)N
For a working life of 50 and 100 years
Steel failure
Characteristic resistance HIS-N
Characteristic resistance HIS-RN
Combined pullout and concrete cone failure for a working life of 50 years
Characteristic resistance in cracked concrete C20/25
in hammer drilled holes and hammer drilled holes with Hilti hollow drill bit TE-CD or TE-YD
and diamond cored holes with roughening with Hilti Roughening tool TE-YRT
Temperature range I:
Temperature range II:
Temperature range III:
Combined pullout and concrete cone failure for a working life of 100 years
Characteristic resistance in cracked concrete C20/25
in hammer drilled holes and hammer drilled holes with Hilti hollow drill bit TE-CD or TE-YD
and diamond cored holes with roughening with Hilti Roughening tool TE-YRT
Temperature range I:
Temperature range II:
Temperature range III:
Influence factors  on bond resistance 
Influence of concrete strength
Temperature range I to III:
Injection system Hilti HIT-RE 500 V4
Performance
Essential characteristics under tension load for seismic performance category C1
in concrete
N
Rk,s,C1
N
Rk,s,C1

40°C / 24°C [N/mm
Rk,C1

55°C / 43°C [N/mm
Rk,C1

75°C / 55°C [N/mm
Rk,C1

40°C / 24°C [N/mm²]
Rk,100,C1

55°C / 43°C [N/mm²]
Rk,100,C1

75°C / 55°C [N/mm²]
Rk,100,C1
and 
Rk,C1

c
M8 M10
[kN] 25 46
[kN] 26 41
2
] 8,4 8,6
2
] 7,4 7,6
2
] 2,8 3,3
6,5 6,7
5,6 6,2
2,8 2,9
Rk,100,C1
[-]
Page 53 sur 61 | 0 4 / 0 9 / 2 0 2 1
M12 M16
67 125
59 110
8,7 9,0
7,8 8,0
3,4 3,5
6,8 7,0
6,3 6,5
2,9 3,0
1,0
Annex C30
M20
116
166
9,0
8,0
3,5
7,0
6,5
3,0