Hilti HIT-RE 500 V4 Mode D'emploi page 56

European technical assessment E T A - 2 0 / 0 5 4 1
English translation prepared by CSTB
Table C27: Essential characteristics for Hilti Tension anchor HZA / HZA-R under
tension load for seismic category C1 in concrete
HZA / HZA-R
Rebar diameter
For a working life of 50 and 100 years
Steel failure
Characteristic resistance HZA
Characteristic resistance HZA-R
Combined pullout and concrete cone failure for a working life of 50 years
Characteristic resistance in cracked concrete C20/25
in hammer drilled holes and hammer drilled holes with Hilti hollow drill bit TE-CD or TE-YD
and diamond cored holes with roughening with Hilti Roughening tool TE-YRT
Temperature range I:
Temperature range II:
Temperature range III:
Combined pullout and concrete cone failure for a working life of 100 years
Characteristic resistance in cracked concrete C20/25
in hammer drilled holes and hammer drilled holes with Hilti hollow drill bit TE-CD or TE-YD
and diamond cored holes with roughening with Hilti Roughening tool TE-YRT
Temperature range I:
Temperature range II:
Temperature range III:
Influence factors  on bond resistance 
Influence of concrete strength
Temperature range I to III:
1)
No performance assessed.
Injection system Hilti HIT-RE 500 V4
Performance
Essential characteristics under tension load for seismic performance category C1
in concrete

N
Rk,s,C1
N
Rk,s,C1

40°C / 24°C [N/mm
Rk,C1

55°C / 43°C [N/mm
Rk,C1

75°C / 55°C [N/mm
Rk,C1

40°C / 24°C [N/mm²]
Rk,100,C1

55°C / 43°C [N/mm²]
Rk,100,C1

75°C / 55°C [N/mm²]
Rk,100,C1
and 
Rk,C1

c
M12 M16
[mm] 12 16
[kN] 46 86
[kN] 62 111
2
] 11,0 11,4
2
] 9,2 9,5
2
] 3,7 3,8
9,2 9,0
8,3 8,1
3,7 3,8
Rk,100,C1
[-]
Page 55 sur 61 | 0 4 / 0 9 / 2 0 2 1
M20 M24
20 25
135 194
173 248
11,6 10,9
9,7 9,4
3,4 3,5
9,2 8,9
8,2 7,9
3,4 3,5
1,0
Annex C32
M27
28
253
1)
11,0
9,5
3,5
9,0
8,0
3,5