Hilti HIT-RE 500 V4 Mode D'emploi page 4

European technical assessment E T A - 2 0 / 0 5 4 1
English translation prepared by CSTB
Safety in use (BWR 4)
3.4
For Basic requirement Safety in use the same criteria are valid as for Basic Requirement
Mechanical resistance and stability.
Protection against noise (BWR 5)
3.5
Not relevant.
Energy economy and heat retention (BWR 6)
3.6
Not relevant.
Sustainable use of natural resources (BWR 7)
3.7
For the sustainable use of natural resources no performance was determined for this product.
General aspects relating to fitness for use
3.8
Durability and Serviceability are only ensured if the specifications of intended use according to
Annex B1 are kept.
4 Assessment and verification of constancy of performance (AVCP)
According to the Decision 96/582/EC of the European Commission
assessment and verification of constancy of performance (see Annex V to Regulation (EU)
No 305/2011) given in the following table apply.
Product Intended use
For fixing and/or supporting to
Metal fasteners
concrete,
for use in
(which contributes to the stability of
concrete
the works) or heavy units
5 Technical details necessary for the implementation of the AVCP system
Technical details necessary for the implementation of the Assessment and verification of constancy
of performance (AVCP) system are laid down in the control plan deposited at Centre Scientifique
et Technique du Bâtiment.
The manufacturer shall, on the basis of a contract, involve a notified body approved in the field of
fasteners for issuing the certificate of conformity CE based on the control plan.
The original French version is signed by
Anca Cronopol
Head of the division
1
Official Journal of the European Communities L 254 of 08.10.1996
structural elements
Page 3 sur 61 | 0 4 / 0 9 / 2 0 2 1
1
, as amended, the system of
0F
Level or class System
―
1