Replacing Oven Lamp; Technical Assistance; Informations To The Consumers - Hendi 225172 Mode D'emploi

REPLACING OVEN LAMP

Electrically switch off the appliance; unscrew the
protective glass cap; unscrew the lamp and replace
Voltage
Power
Fitting
Refit the glass cap and power up the appliance.
Put back the lamp cover with the gaskets and turn on the electricity.

11. TECHNICAL ASSISTANCE

Before leaving the factory, the appliance was com-
pletely regulated and tested by expert specialised
personnel to guarantee the best operating results.
All repairs and settings must be performed with ut-
most care and attention, respecting national safety

12. INFORMATIONS TO THE CONSUMERS

Further to Directive 2002/96/EC, the
symbol of the crossed rubbish skip on
the appliance means that at the end of
its life, the product must be disposed of
separately from the other rubbish. The
user must hand the
appliance to a specialised waste collec-
tion centre for electric and electronic
equipment.
230/240 V
15 W
E 14
it with another lamp suitable for high temperatures
(300°C), with the following characteristics:
regulations in force. Always contact your retailer or
our nearest Service Centre, giving details of the
problem, the appliance model and the serial number
(on the rating plate on the rear panel).
The separate collection of the rubbish and subse-
quent treatment, recovery and disposal help to pro-
duce other equipment using recycled materials, re-
ducing the negative effects on the environment and
public health, which would be caused by incorrect
management of the rubbish.
Should the user dispose of the product abusively, ad-
ministrative sanctions would be applied.
EN
9