How To Use The Control Panel; Programming Cooking Time; Programming Cooking Temperature; Control Thermostat Indicator Light - Hendi 225172 Mode D'emploi

7. HOW TO USE THE CONTROL PANEL

„End of cooking" programmer indicator light

Control thermostat indicator light

Humidifier knob (only for oven HENDI 225028)
EN

PROGRAMMING COOKING TIME

To run the oven, turn the programmer knob (Fig. 1) in
line with symbol
with the selected cooking time (up to 120 minutes). In

PROGRAMMING COOKING TEMPERATURE

Turn the knob of the adjustment thermostat (Fig. 2) in line with the temperature selected for cooking.
CONTROL THERMOSTAT INDICATOR LIGHT
The control thermostat orange indicator light goes
OFF whenever the programmed temperature is
reached inside the cooking compartment. It lights up
„END OF COOKING" PROGRAMMER INDICATOR LIGHT
The programmer green indicator light indicate that
the oven is electrically connected to the power supply

OVEN INTERNAL LIGHT

The light is always on when the oven is operating.
6
Fig. 1
"End of Cooking"
programming knob
(continuous operation) or in line
Fig. 2
Control thermostat
knob
the second case, end of cooking is signalled by the
oven switching OFF automatically.
again when the thermostat is tripped to re-establish
this temperature.
line and that cooking time is active.