Spare Parts - Tool; Rechargeable Battery Pack; Protecting The Environment - Stanley SB25PT-05 Manuel D'instructions

O RIGINAL INSTRU CT I ON
6.4 SPARE PARTS – TOOL
For consumables such as nose equipment, mechanical cursors, mandrels and follower springs, we refer you
to the accessory manuals which you can fi nd on our website at
https://www.STANLEYEngineeredFastening.com/resource-center/document-library
Below is a list of available tool spares
Part number Description
07151-00403 Tail Jaw
75000-02112 Label – Stroke Switcher
75000-02209 OP Ring
75000-02400 Tail Jaw Cartridge
75000-02505 Tail Jaw Cover
75000-02507 Retainer
75000-02509 Cover Pin
For any other non-conforming tool part replacements, contact your local authorized service center who will
provide further support and guidance.

6.5 RECHARGEABLE BATTERY PACK

The long-life battery pack must be recharged when it fails to produce suffi cient power on jobs which were
easily completed before. At the end of its technical life, discard it with due care for our environment:
• Run the battery pack down completely, then remove it from the tool
• Li-Ion cells are recyclable. Take them to your dealer or local recycling station. The collected battery
packs will be recycled or disposed of properly.

6.6 PROTECTING THE ENVIRONMENT

Separate collection. This product must not be disposed of with normal household waste.
Should you fi nd one day that your STANLEY Engineered Fastening® product needs replacement,
or if it is of no further use to you, do not dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging allows materials to be recycled and used
again. Re-use of recycled materials helps prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of electrical products from the household, at
municipal waste sites or by the retailer when you purchase a new product.
You can check the location of your nearest authorized repair agent by contacting your local
STANLEY Engineered Fastening® representative at the address indicated in this manual.
Alternatively, a list of authorized STANLEY Engineered Fastening® repair agents and full details of
our after-sales service and contacts are available on the Internet at:
www.STANLEYEngineeredFastening.com
24
Quantity Per Tool
1 Set (2pieces)
1
1
1
1
1
1