tRoUBLEShootInG
tRoUBLEShootInG
PRoBLEM
PoSSIBLE CAUSES
the hot WAtER
•
HOT WATER dial is
OPEN.
LED flashes when the
machine is turned on
the StEAM LED
•
STEAM LEVER is
flashes when the
OPEN.
machine is turned on
Water does not flow
•
Machine has not
reached operating
from the group head
temperature.
•
Water tank is empty.
•
Water tank is not fully
inserted and locked
into position.
fILL tAnk on LCD
•
Water tank is not fully
inserted and locked
screen, but water tank
into position.
is full
no Steam or hot
•
Machine is not turned
Water
On.
no hot Water
•
Water tank is empty.
no Steam
•
Steam Wand is blocked.
WhAt to Do
Turn the HOT WATER dial to
the CLOSED position.
Move the STEAM LEVER to
the CLOSED position.
Allow time for the machine to
reach operating temperature.
The POWER light will stop
flashing when machine is
ready.
Fill tank.
Push water tank in fully and
lock latch closed.
Push water tank in fully and
lock latch closed.
Ensure the machine is
plugged in and the POWER
button is On.
Fill water tank.
Use the pin on the end of the
provided cleaning tool. If
steam wand remains blocked,
remove the tip using the
integrated spanner in the
cleaning tool and soak in hot
water. Screw tip back onto
the steam wand using the
integrated spanner in the
cleaning tool.
33