Troubleshooting - Breville the YouBrew BDC600XL Livret D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING

TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
'LOCK BEAN
Hopper not locked
HOPPER' on LCD
in place.
screen
Unable to lock
Coffee beans
obstructing bean hopper
bean hopper
locking device.
'FILL TANK' on
Water tank is empty.
LCD screen
'EMPTY COFFEE
Coffee basket not
in place or not correctly
FILTER' on LCD
assembled.
screen
Swing-out door not
closed properly.
Coffee basket
not emptied of
used grinds.
Grinder starts
Grinder is blocked with
a foreign item.
but operates with
a loud noise. No
coffee in the coffee
basket.
Moisture clogging
grinder.
WHAT TO DO
Turn the locking knob clockwise
in the direction of the LOCK arrow
until it clicks.
Remove bean hopper. Clear coffee
beans from the grinding chamber
and around the upper burr. Try
re-locking the bean hopper.
Press open the fl ip-top water tank
lid. Pour the desired amount of cold,
preferably fi lter water.
Check that the coffee basket lid
is closed and the coffee basket is
fi rmly seated on the two door hooks.
Close the door until it clicks shut.
Remove the coffee basket and
discard used grinds. Wash the
coffee basket, taking particular
care to rinse the chute area. Dry
thoroughly (especially the chute
area). Attach to the swing-out door.
Close the door until it clicks shut.
Check the bean hopper for any
foreign body. If there is none, refer
to 'Cleaning the Grinding Burrs and
Coffee Grinds Chute', page 25.
Clean and thoroughly dry the
grinding burrs and coffee grinds
chute. Refer to`Cleaning the
Grinding Burrs and Coffee Grinds
Chute', page 25. It is possible to
use a hair dryer to blow air into the
grinding chamber and dry the
lower burr. Only re-commence use
when the grinding chamber and
grinding burrs are completely dry.
29

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

The youbrew bdc600xl/a

Table des Matières