Breville Dual Boiler BES900XL /B Fonctionnement page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

oPERAtInG yoUR BREvILLE DUAL BoILER™
If AUTO START is ON, the LCD will
display a clock icon.
Auto Start - Setting the on time
Ensure Auto Start is set to ON.
Press MENU button until AUTO START
icon flashes and the current Auto Start time
is displayed on the LCD screen.
The default AUTO START time is 7:00AM.
Press UP or DOWN arrow to adjust
AUTO START to the desired time. For faster
scrolling, press and hold the UP or DOWN
arrow. Press the EXIT button to set the new
Auto Start time.
18
CLEAn CyCLE
Select this feature when the LCD screen
displays CLEAN ME! Refer to page 22
and 29 for instructions.
oPERAtInG yoUR BREvILLE DUAL BoILER™
RESEttInG DEfAULt SEttInGS
The machine has the following default
settings:
Temperature – 200°F (93°C)
1.
Pre-Brew Infusion – PP60, Pd07
2.
seconds
Auto Start - OFF
3.
Auto Start Time - 7.00AM
4.
Audio - LO
5.
Clock – 12:00am
6.
Temperature Unit – Fahrenheit
7.
Auto Power Off – On
8.
1 CUP default volume
9.
- approx. 1oz/30ml
2 CUP default volume
10.
- approx. 2oz/60ml
To reset machine to original default
settings, first ensure machine is
switched Off. Press and hold 1 CUP
& 2 CUP buttons and then press the
POWER button.
The LCD will display REST. All
programmed settings will be reset to
the original default settings.
The machine will return to STANDBY mode.
ADvAnCED fUnCtIonS
Press & hold - 1 CUP
Press & hold 1 CUP button to deliver water
to the group head at full pump pressure and
release button to stop extraction.
This by-passes the pre-infusion step and
delivers water to the group head at full
pump pressure. This function can be used
when purging the group head.
Press & hold - 2 CUP
Press & hold 2 CUP button to deliver water
to the group head at full pump pressure and
release button to stop extraction.
This by-passes the pre-infusion step and
delivers water to the group head at full
pump pressure. This function can be used
when purging the group head.
Press & hold - MAnUAL
Press & hold the MANUAL button to
deliver water to the group head at low
pre-infusion pressure. When MANUAL
button is released, water will continue at
full pump pressure. Press MANUAL button
again to stop extraction.
This function can be used to manually
control the pre-infusion duration.
19

Publicité

Chapitres

Table des Matières
loading

Table des Matières