Troubleshooting - Problems With The Computer Display; Maintenance, Cleaning And Care - Sportplus SP-HT-0100-B-iE Mode D'emploi

8. TROUBLESHOOTING - PROBLEMS WITH THE COMPUTER DISPLAY

No function values are displayed. This could mean there is transmission interference
between the home trainer and the computer. Check to see that all cables are properly
connected to one another and that none of the cables is damaged.
TROUBLESHOOTING
Problem
No computer display
Incorrect computer
display

9. MAINTENANCE, CLEANING AND CARE

• After the assembly and before using the home trainer, always make sure that all
bolts/nuts are fully and correctly tightened.
• Clean the unit regularly with a slightly damp cloth and a mild cleaning agent.
• Empty batteries are hazardous waste — please dispose of them correctly, and do not
throw them away with normal household trash.
• Should you wish to eventually dispose of the product, you should remove the batteries
from the computer and dispose of them separately as hazardous waste.
REPLACING THE BATTERIES:
The batteries need to be replaced when the display shows the battery symbol.
To do this, open the battery compartment cover on the back of the computer and insert
new batteries.
Two 1.5 V AA batteries are required. Always replace all old batteries with new ones and
always heed correct polarity when inserting new batteries.
SP-HT-0100-B-iE & SP-HT-0100-W-iE-IM-V01-INT.indb 42 SP-HT-0100-B-iE & SP-HT-0100-W-iE-IM-V01-INT.indb 42
Solution
Replace the computer batteries with new batteries.
- Check all cables leading to the computer.
- Remove and reinsert batteries after one minute.
42
26 Aug 2021 10:46:32 am 26 Aug 2021 10:46:32 am