Cleaning Of Eha18, Eha27, Eha45 - GG EHA27 Mode D'emploi D'origine

8.7

Cleaning of EHA18, EHA27, EHA45

Clean the machine using clear water with a normal cleaning agent.
Cleaning of the juice pipe of the heat exchanger spiral
Quick cleaning:
- Switch off the machine using the main switch (11).
- Unscrew the flow through regulation (7). Instead, connect a hose and put the open end into a
drain.
- You can drain the juice pipe through the juice inflow (9).
- Once the juice pipe is empty, push a sponge rubber ball into the juice inflow (9). Connect a hose
and open the water tap. The water pressure pushes the sponge rubber ball through the juice
pipe and cleans it from the inside.
- Repeat this process 3 times.
Thorough cleaning:
- Switch off the machine using the main switch (11).
- You can drain the juice pipe through the juice inflow (9).
- Fill a container with water and cleaning agent.
- Connect this container via a pump to the juice inlet (9) and to the juice outlet (8).
- Switch the machine on using the main switch (11).
- Turn the step switch (13) to 0
- Depending on the cleaning agent (according to the statement of the manufacturer) run the
circulation process for 20 to 30 min.
- Following this process, the system must be flushed well with clean water.
Original operating manual Pasteurizer electrical
25.10.2021
ATTENTION
Do not clean the machine with a steam cleaner or pressure washer!
CAUTION
Risks of burns due to hot connector pieces!
Risk of scalding due to hot liquids!
Operation
60 of 136
English