Publicité
Les langues disponibles
Les langues disponibles
2. Place the reel with handle on the machine
And secure it with two screws on the front
and two screws on the back
(see diagram)
invalidates the guarantee!
4. Screw the high-pressure hose onto the
water outlet on the back.
6. Decide which jet lance you wish
to use: the narrow/flat jet, the
rotating head or the terrace
cleaner. Insert the end of the
relevant lance into the jet pistol and screw it firmly tight.
3. Check that the water filter is in the water
inlet and is not blocked. Then firmly screw
the quick-connector onto the water inlet.
The filter catches sand, scale and
contaminants that can damage the pump.
Using the machine without the filter
5. Screw the high-pressure hose onto the jet pistol.
Tighten firmly using the no. 17 spanner
7. Connect a normal ½" garden hose (reinforced)
of min. 5m. and max. 25m. to the water
supply and turn it on for a short time in order
to flush any dirt out of the hose. Now use a
quick connector to connect the hose to the
water inlet.
36
Publicité
