SMA Solar Technology AG
• Remove all four transport handles from the
threaded holes. If necessary, insert a
screwdriver into the holes on the transport
handle and use the screwdriver to remove the
transport handle.
• Pull the upper part of the original packaging over the inverter.
• Insert the upper padding.
• Close the packaging.
• Secure the packaging and pallet with strapping or with fastening belts.
19. Dispose of the inverter in accordance with the locally applicable disposal regulations for
electronic waste.
Installation Manual
9 Decommissioning the Inverter
STP33-62-US-41-IA-xx-13
4x
61