SMA Solar Technology AG
3. Insert a screwdriver into the holes in the transport
handle and turn the screwdriver through 90°. This
ensures that the transport handles are securely
tightened.
4. Remove the inverter from the Euro pallet and
position the inverter at the installation location.
5. If the inverter is positioned by means of a hoist at the mounting location, screw the eye bolts
into the threads on the top of the inverter and attach the hoist to them. The hoist must be
suitable to take the weight of the inverter.
6. Make sure that the inverter is stable.
7. Remove all four transport handles from the threaded
holes. If necessary, insert a screwdriver into the
holes on the transport handle and use the
screwdriver to remove the transport handle.
Installation Manual
90°
2
1
STP33-62-US-41-IA-xx-13
5 Mounting
4x
3
4x
27